JCDecaux publishes Styr&Stall station status as a near real time JSON feed showing the number of bikes and docks available at each station. Over the course of the day as the system is used some stations may run out of bikes (meaning no trips can start) or may fill up (meaning none can end because no docks are available).
As opposed to current and previous day station depletion detail, this map shows each station's overall availability: the fraction of time checked during which neither bikes nor docks were unavailable. It can also serve as a quick indicator of redistribution effectiveness.
Also shown are availability clusters: Groups of two or more stations in the same availability category within 0.5 km of each other.
Point to marker for average station availability (percent of time neither empty (no bikes) nor full (no docks)).
(note: mouseover doesn't work on Apple or Android smartphones or tablets)
|Covers 13-May-2013 through 19-May-2013||55 stations in service, covering 5.88 sq km|
|Show: markers, availability clusters, or both|
|100% (3 locations, 1 cluster)|
|90% or greater (38 locations, 1 cluster)|
|80% or greater (11 locations, 3 clusters)|
|70% or greater (1 location)|
|below 70% (2 locations, 1 cluster)|
|station not in service|
Styr&Stall vs. other systems
Styr&Stall daily vs. overall station availability
This page is updated daily.
today's depletion detail since midnight
yesterday's depletion detail
| Mexico City
Rio de Janeiro
| San Antonio